LINDOS AUDIO SEQUENCE TEST Griffin - iMic - PC Sound Card
SOURCE MS20 V1.3 Input level set to -1.0
20-Sep-11 01:02 PM


FREQUENCY RESPONSE @0dB [u]
20Hz -1.62 -1.63
31Hz -0.62 -0.50
40Hz -0.50 -0.50
50Hz -0.37 -0.25
100Hz -0.12 -0.13
315Hz 0.00 -0.01
1k0 0.00 -0.01
6k3 -0.37 -0.38
10k0 -0.75 -0.75
12k5 -1.12 -1.00
14k0 -1.25 -1.25
16k0 -1.62 -1.63
20k0 -2.87 -2.74
25k0 -22.00 -22.13
LEVEL VS LEVEL [h]
TEST LEVEL OUT 1kHz [t]
TL dB -11.32 -11.23
DELms 0008
NOISE ITU-468 Q-Pk REL [n]
WTD -51.99 -52.05
DIST RES 1kHz WTD REL [r]/q
-20dB -31.27 -30.81
0dB -51.22 -51.21
+8dB -57.91 -57.85
+12dB -60.41 -60.64
+15dB -62.26 -62.03
+18dB -62.51 -63.37
PHASE DIFFERENCE R-L [z]
3k15 00.00
10k0 04.00
15k0 08.00


In-out test with the iMic set to 'line' mode. Tested using an iPad running Multitrack DAW. Frequency response is ok, reasonable noise performance (still 15dB off optimal 16bit performance, but only 3dB off MM4 mic noise in high gain position on preamp). Handles professional levels upto +18dB. A reasonable quality, portable card that is very affordable. Recommended for use with an iPad