FREQU RESPONSE [u] 0dB
20Hz | -3.50 | -4.49 | |
31Hz | -4.62 | -4.74 | |
40Hz | -5.62 | -5.63 | |
50Hz | -7.50 | -7.13 | |
100Hz | -4.25 | -4.24 | |
315Hz | +0.25 | +0.13 | |
1k0 | 0.00 | 0.00 | |
6k3 | +0.50 | +0.88 | |
10k0 | +0.13 | +0.50 | |
12k5 | +4.50 | +5.88 | |
14k0 | +1.25 | +2.88 | |
16k0 | -4.62 | -3.38 | |
20k0 | -13.12 | -11.63 | |
25k0 | -20.75 | -22.38 | |
TEST LEVEL OUT 400Hz [t]
TL dB | -01.38 | 00.09 | |
DELms | 0000 | | |
SPEED ERROR [e]
NOISE ITU-468 Q-Pk REL [m]
DIST RES 1kHz WTD REL [r]/q
-20dB | -34.40 | -33.55 | |
0dB | -42.63 | -40.81 | |
+8dB | -41.86 | -38.85 | |
+12dB | -38.82 | -36.35 | |
+15dB | -35.68 | -33.73 | |
+18dB | -32.57 | -30.42 | |
FREQUENCY RESPONSE [DIFF]
Red is DPA4060 short grill
Blue is Lindos MM3.
Source is 3" driver in infinite baffle at 100mm with bass EQ (not correct). The use of a single driver allows high levels to be achieved by placing the mic very close up, as needed for testing distortion on complete sequence test. HF roll-off is the speaker.
Noise result is spoilt by the power amp noise at this range! Should be -62 (DPA) and -58dB
|
 |