FREQU RESPONSE [v] -10dB
20Hz | -7.49 | -6.63 | |
31Hz | -8.88 | -7.99 | |
40Hz | -9.24 | -8.24 | |
50Hz | -11.74 | -10.88 | |
100Hz | -6.13 | -5.63 | |
315Hz | -2.00 | -2.01 | |
1k0 | 0.00 | -0.01 | |
6k3 | -1.38 | -0.88 | |
10k0 | -0.13 | +2.49 | |
12k5 | +2.74 | +5.88 | |
14k0 | +0.75 | +4.63 | |
16k0 | -5.49 | -1.75 | |
20k0 | -11.74 | -8.49 | |
25k0 | -22.38 | -17.74 | |
TEST LEVEL OUT 400Hz [t]
TL dB | -00.71 | 01.17 | |
DELms | 0000 | | |
SPEED ERROR [e]
NOISE ITU-468 Q-Pk REL [m]
DIST RES 1kHz WTD REL [r]/q
-20dB | -36.70 | -35.57 | |
0dB | -41.55 | -39.77 | |
+8dB | -37.59 | -35.08 | |
+12dB | -33.96 | -31.44 | |
+15dB | -31.32 | -29.50 | |
+18dB | -29.88 | -28.49 | |
FREQUENCY RESPONSE [DIFF]
Excellent low noise miniature electret mic. A lower cost alternative to the DPA4060, with almost the same noise level, though max SPL is specified as 120dB.
Note HF peak of 4dB@15kHz (less than Beyer show in their graphs and of little consequence).
Noise levels shown are not true (power amp noise). MCE60 measured -62dB ie 38dB SPL 468-wtd. This is in line with the specified figure of 26dB SPL A-wtd.
Blue plot is Lindos MM3 reference, Red is MCE60.
Alignment level is 100dBSPL approx. |
 |