SONY - HDR-FX1E HD Camcorder - Video
| LINDOS AUDIO SEQUENCE TEST | SONY - HDR-FX1E HD Camcorder - Video |
| SOURCE MS10 V3.0 | In-Out MIC setting, wind filter OFF |
| 19-Jun-06 07:00 PM | TOLERANCE Lindos GradeB FAILED |
|
FREQUENCY RESPONSE [v] -10dB
| 20Hz | -22.50* | -21.88* | +3-6 |
| 31Hz | -19.25* | -19.50* | ±3 |
| 40Hz | -14.62* | -14.99* | ±2 |
| 50Hz | -10.75* | -11.24* | ±2 |
| 100Hz | -4.00* | -4.38* | ±2 |
| 315Hz | -0.62 | -0.88 | ±2 |
| 1k0 | 0.00 | +0.01 | ±2 |
| 6k3 | +0.50 | +1.13 | ±2 |
| 10k0 | +0.50 | +1.13 | ±2 |
| 12k5 | +0.50 | +1.00 | ±2 |
| 14k0 | +0.50 | +1.00 | ±3 |
| 16k0 | +0.50 | +0.88 | |
| 20k0 | +0.25 | +0.75 | |
| 25k0 | -7.87 | -7.63 | |
TEST LEVEL OUT 400Hz [t]
| TL dB | 00.31 | -00.54 | ±1.5<1 |
| DELms | 0000 | | <100 |
SPEED ERROR [e]
NOISE ITU-468 Q-Pk REL [m]
DIST RES 1kHz WTD REL [r]/q
| -20dB | -20.57* | -21.03* | -25 |
| 0dB | -38.30 | -38.94 | -30 |
| +8dB | -35.33 | -37.12 | -30 |
PHASE R-L [z]
| 3k15 | 04.00 | | ±45 |
| 10k0 | 02.00 | | ±90 |
| 15k0 | 02.00 | | |
Very poor LF response, and high noise (at this alignment level there is only 9dB of headroom.
Fortunately, the 'line' input setting gives much better signal to noise ratio and a less drastic LF roll-off, permitting good results with a suitable input adapter/equaliser. See separate test sheet with Lindos MFX1 adaptor, for corrected response allowing use with Lindos MiniSonic and MM3 mics, or any mixer line output.
Audio level set to 4 (low settings limit headroom, higher settings increase noise). |
 |
|
|
