SONY - HDR-FX1E HD Camcorder - Video
LINDOS AUDIO SEQUENCE TEST SONY - HDR-FX1E HD Camcorder - Video
SOURCE MS10 V3.0 In-Out on Line input setting
19-Jun-06 12:57 PM TOLERANCE Lindos GradeB FAILED


FREQUENCY RESPONSE [u] 0dB
20Hz -14.37* -14.62* +3-6
31Hz -7.50* -7.50* ±3
40Hz -5.37* -5.50* ±2
50Hz -3.75* -3.75* ±2
100Hz -1.12 -1.12 ±2
315Hz -0.25 -0.25 ±2
1k0 0.00 0.00 ±2
6k3 0.00 0.00 ±2
10k0 0.00 0.00 ±2
12k5 -0.12 -0.12 ±2
14k0 -0.12 -0.12 ±3
16k0 -0.25 -0.25
20k0 -0.37 -0.50
25k0 -9.12 -9.12
TEST LEVEL OUT 1kHz [t]
TL dB -09.88* -09.96* ±1.5<1
DELms 0000 <100
NOISE ITU-468 Q-Pk REL [n]
WTD -54.83 -54.79 -50
DIST RES 1kHz WTD REL [r]/q
-20dB -33.87 -34.25 -25
0dB -53.40 -53.74 -30
+8dB -56.13 -56.44 -30
+12dB -55.08 -55.47 -30
+15dB -52.99 -53.10 -30
+18dB -50.21 -50.38
PHASE R-L [z]
3k15 02.00 ±45
10k0 00.00 ±90
15k0 02.00


Poor LF response, needs compensating. Noise acceptable though 12db worse than true 16-bit performance.

Audio level is set to 4, at which unity gain in-out is acheived. Input is -16dBu (-10dB Unison AL) which just gives 18dB headroom. A permanently in fast-compressor operates above this level. Note that half-way up on the level indicator corresponds to about -12dBFS which is a good level to aim at most of the time.

The LF roll-off, and excess input noise are much the same as on other Sony camcorders, such as the VX1000, but it is possible to get very high quality music recordings using an input adaptor incorporating low frequency equalisation. See separate test sheet for equalised result using the Lindos MFX1 Input adaptor.

Links
Home Page
Latest News

Like Lindos / Share

MiniSonic Mic Kit

Lindos has launched a new range of microphones and accessories - bringing clarity and presicion to your music and video recordings.

Find out more!

LA100 Application Notes

Looking for information about the LA100?

The LA100 Application Notes page contains many downloadable documents. These cover a wide variety of topics including upgrading, optimising and operating the unit.

LA100 Application Notes

MS10 Upgrades

Any MS10 can be upgraded to an MS20 simply by fitting a new MS20 front panel.

About The MS20
Upgrading Your MS10