FREQUENCY RESPONSE @0dB [u]
| 20Hz | -0.50 | -0.38 | |
| 31Hz | -0.12 | -0.13 | |
| 40Hz | -0.12 | +0.01 | |
| 50Hz | -0.12 | +0.01 | |
| 100Hz | 0.00 | +0.01 | |
| 315Hz | 0.00 | +0.01 | |
| 1k0 | 0.00 | +0.01 | |
| 6k3 | 0.00 | +0.01 | |
| 10k0 | 0.00 | +0.01 | |
| 12k5 | 0.00 | +0.01 | |
| 14k0 | 0.00 | +0.01 | |
| 16k0 | 0.00 | +0.01 | |
| 20k0 | 0.00 | +0.01 | |
| 25k0 | -11.62 | -11.49 | |
LEVEL VS LEVEL [h]
TEST LEVEL OUT 1kHz [t]
NOISE ITU-468 Q-Pk REL [n]
DIST RES 1kHz WTD REL [r]/q
| -20dB | -54.43 | -54.64 | |
| 0dB | -68.37 | -68.15 | |
| +8dB | -70.04 | -69.97 | |
| +12dB | -70.00 | -70.69 | |
| +15dB | -69.01 | -69.95 | |
| +18dB | -39.41 | -39.32 | |
PHASE DIFFERENCE R-L [z]
| 3k15 | 00.00 | | |
| 10k0 | 00.00 | | |
| 15k0 | -04.00 | | |
Sequence recorded from MS20 to Audition 5.5 using Yellow's ASIO driver. Recording was then saved in 16bit as a WAV with adaptive noise-shaped dither before being loaded back into Audition and played back to the MS20. Very good results. Noise result when saved without dither was -66. Noise result in 24-bit mode is -76, distortion results in 24 bit mode at -20dB: -56, 0dB: -76dB (checked using LA100, as limit on MS20 is typically -72) |
 |
