Lindos MP1 Specifications

Size116 x 60 x 35mm
PowerVia PP3 battery – included (35hrs use – Alkaline battery).
Via External 12V power supply (6-14V) (2.1mm power jack).
Via UniSon connector (6-9v).
Inputs2 x 3.5mm jack, 5V power on tip, signal on ring.
Input Impedance100kΩ, use external load resistor (typically 1kΩ) when connecting other manufacturers’ microphones.
Maximum Input Level-12dBu (middle gain setting).
OutputsTwo-channel (10ohm source impedance) balanced centre-grounded UniSon on 9-pin D-type plug. Unbalanced with phono or jack leads.
Max Output Level+18dBu (balanced).
Gain+20dB, +30dB, +40dB ±0.15dB.
Flatness±0.02dB typical from 20Hz to 20kHz.
Noise-72dBu ITU-R 468 weighted (-84dBu A-weighted typical) – measured on +30dB gain setting (middle position).
-70dBu (ITU-R 468 weighted) (-82dBu/0.01% THD) at 1kHz (22Hz-22kHz bandwidth) – measured on +30dB gain setting (middle position).
Dynamic Range102dB A-weighted noise (middle gain position)
Shopping Basket
Scroll to Top